Author: a.manzo

Wire and Tube: terms for 2022 are set: the next editions will take place from May 9 to 13, 2022

After the cancellation of the leading international trade fairs wire and Tube 2020 due to the current COVID-19 infection situation, the next editions will take place from May 9 to 13, 2022.

“We look forward to welcoming exhibitors and visitors to Düsseldorf in person again,” says Daniel Ryfisch, Project Director wire / Tube & Flow Technologies. “Corona has shown that digitalization brings many advantages. But it cannot replace personal meetings, conversations and contacts”.

Wire and Tube, which were originally planned for March 30 to April 3, 2020, were on a record course until the COVID-19 related postponement. The number of registrations from exhibitors and visitors in spring exceeded all expectations. “For us this was a further signal and renewed confirmation that we have the No. 1 trade fairs for the wire, cable and tube industry here in Düsseldorf”, explains Daniel Ryfisch. “This is where the international top decision-makers of the exhibitor and visitor sectors come together.”

As usual, wire will be located in halls 9 to 17 – and Tube in halls 1 to 7.0. Companies wishing to exhibit at wire and Tube 2022 can already register starting at the end of March 2021

Bausano renews the offer dedicated to the production of PVC pipes

Extruders and extrusion heads for PVC and polyolefins redesigned to guarantee melt homogeneity, flexibility, productivity and low energy consumption. The Piedmontese manufacturer of extrusion lines Bausano has renewed the entire range of extruders and dies dedicated to the production of soft and rigid PVC pipes, transparent, loaded or pressure, as well as polyethylene and polypropylene pipes. Bausano is a family company that has been designing and manufacturing extrusion lines for plastic processing since 1946. For over 70 years it has focused on quality and stands out for its flexibility and attention. During the design phase, it studies the best possible solutions, customizing the machines and working on an innovative technology based on the integration between mechanical and ICT technologies: intelligent control and intuitive man-machine interface, to increase productivity and improve working conditions. The goal of the new offer is to meet the demands of producers for homogeneity of the melt, process flexibility, maximization of output and reduction of energy consumption. In the case of polyolefin pipes, the benches are designed to calibrate and cool a wide range of diameters, from 5 to 1600 mm. In addition, for both applications, the two-chamber configuration is available, with temperature and water level control, capable of creating vacuum conditions based on specific work needs. For the production of PVC pipes, Bausano offers models with double exit (up to 110 mm) or single exit (from 10 to 800 mm), capable of reaching a maximum productivity of 2,000 Kg / h. (Polimerica)

PTFE tubing from Eaton: ideal for various industries

Eaton, a Segrate-based company with over 96,000 employees, which operates in over 175 countries and offers energy-saving solutions that help customers manage energy more effectively, safely and sustainably, launches two new flexible PTFE (polytetrafluoroethylene) tubes of the Winner series in the Emea market.

The hoses are designed with an external 304 stainless steel braiding and an internal part in Ptfe, resist bending and vibrations. The tubes are calibrated for continuous temperatures from -54 ° C to 236 ° C and for pressures up to 207 bar. They also offer chemical resistance, high flow rates with a low coefficient of friction, a high degree of resistance to aging and unlimited shelf life. They are available in two variants: conductive (EC-TW) and non-conductive (EN-TW); this tubes are ideal for many industrial sectors: for example in chemical transport, in thermal cooling and in heat engines.

Column number 79 – 2021

According to Cecimo’s quarterly review of machine tools market and production, MT production levels are down, as early estimates show output decreasing by more than 30% in 2020 due to the pandemic. In absolute volumes, machine tool production is expected to drop to 18,7 billion euros in 2020. This is the worst score for CECIMO aggregated machine tool output since the 2009 financial crisis.

Always according to Cecimo statistical toolbox Q3-2020, EU27’s Industrial Production Index continue to decrease in the third quarter of 2020. The European economy’s average IPI quarterly reading is currently 99,3, a -5% decrease compared to the same period of the previous year. In sectoral terms, the investment goods sector reports double-digit decreases during this three-month period.

The question is now: how long European industry and, from a larger point of view, European economy will stand this state of things? These figures are some months old, when we all were waiting for 2021 as the year in which pandemic would have definitely left behind: now, in ides of March, we have the reasonable sureness that we will have to handle with it until the third quarter and that its significant legacy is yet to come.

In Italy, where total exports mark -24.2% compared to 2019, for a value of approximately 2,300 million euros, the scenery is dark: government largely permitted extraordinary layoffs, with a contemporary ban on firing, but at the end of these measures many companies will be forced to fire many of their workers. If the pandemic will last any longer, it will be difficult for a great number of companies, not only in Tourism and Food and Wine, but also in Services and Industry, to hold on: many have already closed, much more will in short.

On 11 February 2021, the European Commission published its Winter 2021 Economic Forecast. The forecast projects that the euro area economy will grow by 3.8% in both 2021 and 2022. The forecast projects that the EU economy will grow by 3.7% in 2021 and 3.9% in 2022.

The euro area and EU economies are expected to reach their pre-crisis levels of output earlier than anticipated in the Autumn 2020 Economic Forecast, largely because of the stronger than expected growth momentum projected in the second half of 2021 and in 2022.

After strong growth in the third quarter of 2020, economic activity contracted again in the fourth quarter as a second wave of the pandemic triggered renewed containment measures. With those measures still in place, the EU and euro area economies are expected to contract in the first quarter of 2021. Economic growth is set to resume in the spring and gather momentum in the summer as vaccination programmes progress and containment measures gradually ease.

An improved outlook for the global economy is also set to support the recovery. The economic impact of the pandemic remains uneven across Member States and the speed of the recovery is also projected to vary significantly.

Also for Tube Today the pandemic made everything more complicated: the exhibitions have changed their schedule, some have been cancelled, some other held virtually, and the organization of the issues has been subject to constant changes. Anyway, we are still working to give to our readers, subscribers and customers, the best service we can.

See you in better days.

Tenaris to supply line pipe for Northern Lights CO₂ Transportation and Storage Project

Equinor has awarded Tenaris the supply of tubulars for the Northern Lights CO2 transport and storage facilities in Norway. From its Dalmine mill in Italy, Tenaris will produce 105km 12” Carbon Manganese (C-Mn) seamless line pipe for the milestone project.

“For this unique project, we leveraged our extensive track record, our technical capabilities and environmental commitment to support the project with line pipe products, contributing to the development of a value chain for Carbon Capture and Storage. Participation in an industry defining project such as Northern Lights marks an important forward step for Tenaris and its positioning and product development strategy for its energy transition agenda”, said Gregoire Flipo, Tenaris Line pipe & Process Commercial Vice President.

Tenaris has announced a medium-term plan to reduce its CO2 emissions intensity per ton of steel by 30% compared to its level in 2018 by 2030.

The company will achieve this target by using a higher proportion of recycled steel scrap in the metallic mix, carrying out investments to increase energy efficiency and the use of renewable energy for part of its energy requirements.

“We will give additional transparency and evaluation to this program, which will be followed on a quarterly basis in our Board. This will become an ever more important part of our agenda in the coming years,” said Paolo Rocca, Tenaris Chairman & CEO.

Northern Lights is responsible for developing and operating CO2 transport and storage facilities, open to third parties, as part of Longship, the Norwegian Government’s full-scale carbon capture and storage project. Equinor is responsible for delivering the facilities onshore and offshore as a technical service provider to Northern Lights JV.

Tenaris and Equinor are longstanding business partners, and within its framework agreement, the two companies will continue to collaborate on projects that promote shared values of sustainable, responsible development of energy resources.

Northern Lights enables the mitigation of industrial process emissions for which there is currently no scalable solution, accelerates the decarbonisation of European industry, and facilitates the removal of CO2 from the atmosphere. It is the project that will build the world’s first underwater CO2 storage facility. By 2024, a tank will be activated at a depth of 2,600 meters in the North Sea and 100 kilometers from the Norwegian west coast where 1.5 million tons of CO2 per year can be stored. The goal is to stoke five million. Shell and Total are also partners in the project. In addition to them, the Norwegian government, which has allocated over 1.6 billion euros.